Mega Sg: Firmware Update v4.2

How to update the firmware on your Mega Sg

1. Download "msg_firmware_verX.X.bin" attached on this page. Unzip the file if needed.
2. Format an SD card to FAT32. 
3. Copy"msg_firmware_verX.X.bin" onto the SD card. No other files can be on the SD card except for the firmware .bin file. 
5. Power your Mega Sg off.
6. Insert the SD card into your Mega Sg SD card slot. 
7. Power your Mega Sg on. 
8. Your Mega Sg will automatically begin to update. The updating process will be represented by the Power LED on the front of your Mega Sg rapidly blinking. 
9. This will take 3-4 minutes. Do not power down your Mega Sg during this process or disturb the unit in any way. 
10. When your Mega Sg is finished updating, the unit will auto re-boot and the LED's color will turn back into it's normal mode (white). 
11. Your Mega Sg has now been updated. 

v4.2 notes:

- changed Genesis PSG default panning to mono

v4.1 notes:

- all SMS channels are now mono
- Turned FM on by default for SMS
- Moved filter enable to filter dialogue
- Defaulted all channels to on for genesis
- Set default cutoff/rolloff to something that is audible when filter is enabled
- Optimized filter selection

v4.0 notes:

- refined some cropping & border settings
- added more sophisticated audio controls & filter options
- misc small menu bug fixes

v3.8 notes:

- Release firmware

Please note:

- Legacy firmware versions included below. When updating firmware, we suggest using the latest firmware. You do not have to update your firmware in order, simply update with the latest firmware file below.
- When you update your Mega Sg's firmware it will reset all of your system settings.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request